重现步骤
在部署模型到canmvk230d-zero时，烧录镜像CanMV-K230D_Zero_micropython_v1.2.2-0-g4b8cae1_nncase_v2.9.0.img，无法识别到板子
期待结果和实际结果
软硬件版本信息
错误日志
尝试解决过程
补充材料
3 Answers
U-Boot SPL 2022.10 (Dec 18 2024 - 02:55:58 +0000)
00000000: PMU Major Msg: End of CA training
00000000: PMU Major Msg: End of initialization
00000000: PMU Major Msg: End of read enable training
00000000: PMU Major Msg: End of fine write leveling
00000000: PMU Major Msg: End of read dq deskew training
00000000: PMU Major Msg: End of MPR read delay center optimization
00000000: PMU Major Msg: End of Write leveling coarse delay
00000000: PMU Major Msg: End of write delay center optimization
00000000: PMU Major Msg: End of read delay center optimization
00000000: PMU Major Msg: End of max read latency training
00000000: PMU Major Msg: Firmware run has completed 2667
sdhci_transfer_data: Transfer data timeout
image: uboot load to 1000000 compress =1 src 55557aa len=49dd8
U-Boot 2022.10 (Dec 18 2024 - 02:55:58 +0000)
CPU: rv64imafdcvsu
Model: kendryte k230d canmv bpi zero
DRAM: 128 MiB
Core: 28 devices, 13 uclasses, devicetree: separate
MMC: mmc0@91580000: 0, mmc1@91581000: 1
Loading Environment from MMC... sdhci_transfer_data: Transfer data timeout
OK
In: serial@91400000
Out: serial@91400000
Err: serial@91400000
Net: No ethernet found.
Hit any key to stop autoboot: 0
K230#
U-Boot SPL 2022.10 (Dec 18 2024 - 02:55:58 +0000)
00000000: PMU Major Msg: End of CA training
00000000: PMU Major Msg: End of initialization
00000000: PMU Major Msg: End of read enable training
00000000: PMU Major Msg: End of fine write leveling
00000000: PMU Major Msg: End of read dq deskew training
00000000: PMU Major Msg: End of MPR read delay center optimization
00000000: PMU Major Msg: End of Write leveling coarse delay
00000000: PMU Major Msg: End of write delay center optimization
00000000: PMU Major Msg: End of read delay center optimization
00000000: PMU Major Msg: End of max read latency training
00000000: PMU Major Msg: Firmware run has completed 2667
sdhci_transfer_data: Transfer data timeout
image: uboot load to 1000000 compress =1 src 55557aa len=49dd8
U-Boot 2022.10 (Dec 18 2024 - 02:55:58 +0000)
CPU: rv64imafdcvsu
Model: kendryte k230d canmv bpi zero
DRAM: 128 MiB
Core: 28 devices, 13 uclasses, devicetree: separate
MMC: mmc0@91580000: 0, mmc1@91581000: 1
Loading Environment from MMC... sdhci_transfer_data: Transfer data timeout
OK
In: serial@91400000
Out: serial@91400000
Err: serial@91400000
Net: No ethernet found.
Hit any key to stop autoboot: 0
image: rtt load to 0 compress =1 src 55557b2 len=185203
Jump to big hart
OpenSBI v1.2.2
heap: [0x004b75c0 - 0x00eb75c0], size 10240 KB
page: [0x00eb75c8 - 0x02ffec00], size 34077 KB
lwIP-2.1.2 initialized!
Can't find sensor on csi0
[I/SDIO] SD card capacity 62367744 KB.
Can't find sensor on csi2
vicap_mcm_init[E/drv_touch] touch probe failed.
[I/sal.skt] Socket Abstraction Layer initialize success.
#############SDK VERSION######################################
SDK : v1.2.2-20241218-025648-runner-fv-az1757-183-0820549
CanMV : v1.2.2-20241218-025648-runner-fv-az1757-183-4b8cae1
nncase: 2.9.0
##############################################################
msh />sdhci_transfer_data_blocking: Transfer data timeout
[E/SDIO] mmcsd request blocks error
[E/SDIO] -1,0,0, 0x00000002,0x00000000
[I/GPT] status:255
sdhci_transfer_data_blocking: Transfer data timeout
[E/SDIO] mmcsd request blocks error
[E/SDIO] -1,0,0, 0x00000002,0x00000000
[E/SDIO] read mmcsd first sector failed
[I/WLAN.dev] wlan init success
[I/WLAN.lwip] eth device init ok name:w0
[I/WLAN.dev] wlan init success
[I/WLAN.lwip] eth device init ok name:w1